No. 24000 ~ 24999

24001: Unable to open control file.

Cause Failed to open the control file.

Action Check the file path and permissions and try again.

24002: Too many %1$s.

Cause The number of DB files exceeds the specified number.

Action Contact the technical support team.

24003: Unable to read control file.

Cause Cannot read the control file.

Action Check the file path and permissions and try again.

24004: Unable to write to control file.

Cause Cannot write to the control file.

Action Check the file path and permissions and try again.

24005: Unable to create controlfile.

Cause Failed to create a control file.

Action Check the file path and permissions and try again.

24006: Unable to load controlfile %1$s.

Cause Cannot load the control file.

Action Check the file path and permissions and try again.

24007: Invalid control file record %1$d.%2$d.

Cause The record was not found in the control file.

Action Verify that the correct control file is specified and try again.

24008: Unable to add tablespace name %1$s.

Cause Failed to add a tablespace.

Action Verify the tablespace name is not a duplicate.

24009: Tablespace %1$s is not empty.

Cause The tablespace is not empty.

Action Check data files in the tablespace and try again.

24010: Tablespace %1$s is in online backup mode.

Cause The tablespace is involved in an online backup.

Action Try again after the online backup is complete.

24011: Tablespace %1$s is not in online backup mode.

Cause The tablespace is not involved in an online backup.

Action Try again after an online backup has started.

24012: No such tablespace %1$d.

Cause Failed to add the tablespace.

Action Verify a tablespace exists and try again.

24013: No space left in tablespace %1$d.

Cause No space is left in the control file.

Action Check the control file and try again.

24014: Datafile %1$d is not online.

Cause Cannot use the datafile.

Action Contact the technical support team.

24015: Datafile %1$d was not found.

Cause Cannot find the datafile.

Action Contact the technical support team.

24016: Datafile %1$d in tablespace %2$d was not found.

Cause Cannot find the datafile.

Action Contact the technical support team.

24017: No datafile left.

Cause No datafile left.

Action Check the control file and try again.

24018: CF-DD correction is required due to wrong CF/DD info or added/dropped datafiles while recovery process.

Cause CF-DD correction is required due to wrong CF/DD info or added/dropped datafiles while recovery process.

Action Contact the technical support team for the guide.

24019: Critical error occurred.

Cause A critical error occurred in the control file.

Action Contact the technical support team.

24020: No such logfile ID %1$d.

Cause Cannot find the ID of the log file.

Action Check the log file and try again.

24021: Unable to add additional log files.

Cause Cannot add log files.

Action Check the values of MAXLOGGROUPS and MAXLOGMEMBERS.

24022: Duplicate log file ID %1$d exists.

Cause The log file ID is already in use.

Action Choose a new logfile ID and try again.

24023: Unable to drop log file %1$s.

Cause Failed to delete the log file.

Action Locate the cause of the failure and try again.

24024: Unable to drop log member %1$s.

Cause Failed to delete the log member.

Action Check the number of log files and see if they are archived.

24025: Unable to drop system tablespace datafile %1$d.

Cause Cannot drop the datafile of the system tablespace.

Action Check the datafile to be deleted.

24026: Blocksize (%1$d) does not match DB_BLOCK_SIZE (%2$d).

Cause DB_BLOCK_SIZE is invalid.

Action Modify DB_BLOCK_SIZE and try again.

24027: Invalid DB_NAME value in .tip file: '%1$s' should be '%2$s'.

Cause The DB name does not match with the control file.

Action Check the [database sid].tip file and the control file.

24028: Unable to begin online backup '%1$s' - %2$s.

Cause Online backup is available only in archive log mode.

Action Change the DB setting to archive log mode.

24029: Unable to shut down: file %1$d ('%2$s') has online backup set.

Cause Online backup is being processed.

Action End the online backup and close DB.

24030: Unable to create more tablespace.

Cause Cannot create more tablespace.

Action Check the value of MAXDATAFILES and modify it if necessary.

24031: Unable to create more data files.

Cause Cannot create more data files.

Action Check the value of MAXDATAFILES and modify it if necessary.

24032: Archive filename is too long: must be less than %1$d.

Cause The absolute path of the archive is too long.

Action Specify a shorter name or absolute path.

24033: Unable to add log member %1$s.

Cause Cannot add a log member.

Action Check the value of MAXLOGMEMBERS and modify it if necessary.

24034: Unable to change datafile #%1$d status: %2$s.

Cause Cannot change the condition of the data file.

Action Contact the technical support team.

24035: Unable to read file %1$d at this time.

Cause The datafile is offline.

Action Set the file to online and try again.

24036: Unable to modify file %1$d.

Cause The datafile is read-only.

Action Change the read/write settings of the file and try again.

24037: Incompatible control file version.

Cause The control file is not compatible.

Action Check the version information of the control file and the server.

24038: Tablespace '%1$s' is offline.

Cause The tablespace is offline.

Action Set the tablespace to online and try again.

24039: Unable to modify tablespace '%1$s'.

Cause The tablespace is read-only.

Action Change the tablespace settings and try again.

24040: Unable to set tablespace '%1$s' as read-only: %2$s.

Cause Cannot set the tablespace as read-only.

Action Check the tablespace type and try again.

24041: Unable to set datafile #'%1$d' as read-only: %2$s.

Cause Cannot set the datafile as read-only.

Action Check the data file type and try again.

24042: Tablespace '%1$s' is not read only: %2$s.

Cause Cannot make the tablespace read-only.

Action Check the tablespace settings and try again.

24043: Unable to clear logfile: %1$s.

Cause Cannot clear the logfile.

Action Contact the technical support team.

24044: Redo thread #%1$d is too big (max %2$d).

Cause No space available for redo threads.

Action Contact the technical support team.

24045: Unable to change thread #%1$d status: %2$s.

Cause Cannot modify the properties of the redo/flashback thread.

Action Check the condition of the redo/flashback thread and try again.

24046: Tablespace '%1$s' is a temporary tablespace.

Cause Temporary tablespace.

Action Contact the technical support team.

24047: Tablespace '%1$s' is in the middle of backup.

Cause The tablespace is involved in an online backup.

Action Try again after the online backup is complete.

24048: File %1$d is in the middle of backup.

Cause The datafile is involved in an online backup.

Action Try again after the online backup is complete.

24049: Unable to open datafile #%1$d: %2$s.

Cause Cannot open the datafile because datafile information does not match the control file.

Action Check the condition of the control file and the datafile and try again.

24050: Database cannot be run in single instance mode.

Cause Cannot run the database in single instance mode.

Action Use cluster database.

24051: Cannot take tablespace '%1$s' offline.

Cause Cannot take the tablespace offline.

Action Check the condition of the tablespace and try again.

24052: Only allowed if media recover is enabled.

Cause Media recover is not enabled.

Action Check the log mode of the database and try again.

24053: Cannot recover the redo thread #%1$d because it is closed.

Cause Cannot recover the redo thread.

Action Check the log files that belong to the redo thread.

24054: The comp version of the control file does not match.

Cause The comp version of the control file does not match that of a server.

Action Check the comp versions of the control file and the server, and recreate a control file if necessary.

24055: None of the tablespaces are in the online backup mode.

Cause Cannot perform end backup.

Action Try again after an online backup is started.

24056: Flashback thread #%1$d is too big (max %2$d).

Cause No space available for flashback threads.

Action Contact the technical support team.

24057: No such redo thread %1$d.

Cause Cannot find the redo thread.

Action Check the configuration and try again.

24058: No such backup set %1$d.

Cause Cannot find the backup set.

Action Verify that the backup set exists and try again.

24059: Tablespace %1$s not in backup set %2$d.

Cause Cannot find the tablespace in the given backup set.

Action Check the backup set.

24060: No such controlfile section %1$s.

Cause Cannot find the given section.

Action Verify that the given section exists and try again.

24061: Controlfile section %1$s has more entries than %2$d.

Cause Cannot resize the given section.

Action Try again with a larger size.

24062: Invalid tsid bitmap.

Cause Invalid tsid bitmap.

Action Verify that tsid bitmap is in correct format.

24063: Backup set %1$u already exists.

Cause Cannot add backup set.

Action Retry after deleting backupset.

24064: The backup archive log file %1$s is not valid.

Cause The backup archive log file %1$s is not valid.

Action Retry the operation with a valid backup archive log file.

24065: Failed to open backup directory %1$s.

Cause Failed to open backup directory %1$s.

Action Retry the operation with a valid backup directory.

24066: Failed to get free backup set record number in the control file.

Cause Failed to get free backup set record number in the control file.

Action Retry the backup operation after deleting old backup sets.

24067: The base backup set #%1$d for the backup set #%2$d does not exist.

Cause The base backup set #%1$d for the backup set #%2$d does not exist.

Action Retry the operation after performing a full backup.

24068: The latest backup set #%1$d is backed up without archivelogs.

Cause The latest backup set #%1$d is backed up without archivelogs.

Action Retry without using --with-archivelog option.

24069: Can't find the target archive log in CF.

Cause Can't find the target archive log in CF.

Action Check whether the target archive log exists in CF.

24070: Failed to get free backup archivelog record number in the control file.

Cause Failed to get free backup archivelog record number in the control file.

Action Retry the backup operation after deleting old backup archivelog.

24071: Datafile backup is successful, but cannot backup archivel ogs.

Cause Datafile backup is successful, but cannot backup archivelogs.

Action Database must be single or share same LOG_ARCHIVE_DEST on Active Storage.

24072: A cleanup is being performed for the previous RMGR oper ation.

Cause A cleanup is being perfromed for the previous RMGR operation.

Action Retry the operation after a while.

24073: The thread count specified for parallel operation exceeds the thread count limit (thread count limit = %1$d).

Cause The thread count specified for parallel operation exceeds the thread count limit (thread count limit = %1$d).

Action Retry the operation with a valid thread count.

24074: Thread allocation failed because the thread count specified for parallel operation exceeds the idle thread count (idle thread count = %1$d).

Cause Thread allocation failed bacause the thread count specified for parallelopeartion exceeds the idle thread count (idle thread count = %1$d).

Action Retry the operation with a valid thread count.

24075: Failed to perform end backup operation (tsid = %1$d).

Cause Failed to perform end backup operation (tsid = %1$d).

Action Retry the operation after performing end backup.

24076: Invalid dfid (dfid = %1$d).

Cause Invalid dfid (dfid = %1$d).

Action Retry the operation with a valid dfid.

24077: The validation target datafile does not exist (dfid = %1$d).

Cause The validation target dataifle does not exist (dfid = %1$d).

Action Retry the operation with a valid dfid.

24078: The validation target datafile is inaccessible (dfid = %1$d).

Cause The validation target datafile is inaccessible (dfid = %1$d).

Action Retry the operation with a valid dfid.

24079: The validation is canceled and cleanup is ongoing.

Cause The validation is canceled and cleanup is ongoing.

Action Retry the operation.

24080: The previous RMGR validation is ongoing.

Cause The previous RMGR validation is ongoing.

Action Retry the operation after a while.

24081: Thread allocation failed because the thread count specified for paralleloperation exceeds the netbackup limit (netbackup lmit count = %1$d).

Cause Thread allocation failed bacause the thread count specified for parallelopeartion exceeds the netbackup limit (netbackup limit count = %1$d).

Action Retry the operation with a valid thread count.

24082: Netbackup parameters are not properly specified in tip file (%1$s).

Cause Netbackup parameters are not properly specified in tip file (%1$s).

Action Retry the operation after specifying netbackup parameters properly in tip file.

24083: Failed to get DOP of netbackup.

Cause Failed to get DOP of netbackup.

Action Retry the operation after checking the connection with the netbackup master.server.

24084: Failed to open a netbackup session.

Cause Failed to open a netbackup session.

Action Retry the operation after checking the connection with the netbackup master.server.

24085: Failed to commit the netbackup TX. The current backup operation is canceled.

Cause Failed to commit the netbackup TX. The current backup operation is canceled.

Action Retry the operation after checking the connection with the netbackup master.server.

24086: Failed to delete the backupset, or could not find it in Net Backup storage.

Cause Failed to delete the backupset, or could not find it in NetBackup storage.

Action Check the connection and files at NetBackup storage, or delete the backupset with '--cf- only' option.

24087: Cannot access netbackup storages. USE_NBU_FOR_BACKUPSET or NBU_ARCHIVELOG_SEARCH is not specified in tip file.

Cause Cannot access netbackup storages. USE_NBU_FOR_BACKUPSET or NBU_ARCHIVELOG_SEARCH is not specified in tip file.

Action Retry the operation after specifying USE_NBU_FOR_BACKUPSET and NBU_ARCHIVELOG_SEARCH in tip file.

24088: NBU_CLIENT_COUNT must be in the range of 1-10 (current value: %1$d).

Cause NBU_CLIENT_COUNT must be in the ragne of 1-10 (current value: %1$d).

Action Retry the operation after checking NBU_CLIENT_COUNT.

24089: NBU_BACKUP_INST_SID must be set to the instance ID of NBU_CLIENT_HOSTNAME_0 in tip file (current settings: NBU_BACKUP_INST_SID=%1$s, NBU_CLIENT_HOST NAME_0=%1$s).

Cause NBU_BACKUP_INST_SID must be set to the instance ID of NBU_CLIENT_HOSTNAME_0 in tip file (current settings: NBU_BACKUP_INST_SID=%1$s, NBU_CLIENT_HOST NAME_0=%1$s).

Action Retry the operation after checking NBU_BACKUP_INST_SID and NBU_CLIENT_HOST NAME_0 in tip file.

24090: Failed to get the hostname of system.

Cause Failed to get the hostname of system.

Action Retry the operation after checking the hostname of system.

24091: Netbackup parameter is inconsistent (%1$s).

Cause Netbackup parameter is inconsistent (%1$s).

Action Retry the operation after checking the netbackup parameter in tip file.

24092: Netbackup processes are still performing the previous op eration (ongoing process count = %1$d).

Cause Netbackup processes are still performing the previous operation (ongoing process count = %1$d).

Action Retry the operation after a while.

24093: NetBackup operation is canceled/stopped. NetBackup slaves aborts.

Cause NetBackup operation is canceled/stopped. NetBackup slaves aborts.

Action NetBackup operation is canceled/stopped. NetBackup slaves aborts.

24095: Data file is more recent than control file. Get current control file, or recreate control file and try again.

Cause CF SEQ in DF header is larger than CF SEQ in CF header.

Action Check whether given control file is backup file, or recreate the control file.

24096: Failed to assign datafile (dfid = %1$u)

Cause Failed to assgin datafile (dfid = %1$u)

Action Check if the given datafile exists in the backup set

24097: Failed to find the archive logs after the last archive log backup.

Cause Failed to find the archive logs after the last archive log backup.

Action Check if the target archive logs are in the backup_dest directory.

24098: Failed to find a tablespace to backup/restore.

Cause Failed to find a tablespace to backup/restore.

Action Check if the rmgr options are too much for the tablespaces available.

24099: Memory tablespace aalready exists.

Cause Memory tablespace aalready exists.

Action Drop the existing memory tablespace first.

24100: Memory tablespace cannot have datafiles more than \'%1$d\'.

Cause Memory tablespace has too many datafiles.

Action Check the number of datafiles.

24101: No free space for memory tablespace.

Cause The size of memory tablespace exceeds the maximum size allowed.

Action Check the size of memory tablespace.

24102: Current log file %1$d is still open.

Cause Cannot disable the corresponding redo thread.

Action Check the configuration or use the IPARAM(_CF_DISABLE_REDO_THREAD_FORCE).

24103: Failed to find a readonly or an offline tablespace with the given option.

Cause Failed to find a readonly or an offline tablespace with the given option.

Action Check the status of the tablespaces and --skip-readonly / --skip-offline options.

24104: If datafiles are the backups, please restore the backup controlfile together or re-create a new controlfile.

Cause The controlfile ckpt_tsn(%1$s) and the datafiles' ckpt_tsn(%2$s) do not match.

Action Please check the backup controlfile or the online redo logs after the backup.

24105: The option '--for-standby' needs the latest backup set to be FOR_STANDBY.

Cause The option '--for-standby' needs the latest backup set to be FOR_STANDBY.

Action The option '--for-standby' needs the latest backup set to be FOR_STANDBY.

24106: Using netbackup dummy library. Do not use netbackup with dummy library.

Cause Using netbackup dummy library. Do not use netbackup with dummy library.

Action Using netbackup dummy library. Do not use netbackup with dummy library.

24107: Failed to add tablespace: could not aquire tablespace sec tion record.

Cause Cannot aquire tablespace section record in controlfile.

Action Try again after previous addition of tablespace is resolved.

24108: RMGR VALIDATION FAILED

Cause RMGR VALIDATION FAILED

Action Retry the operation after a while.

24109: Backup set(%1$d) not found. Specify the path actually lo cated.

Cause Backup set(%1$d) not found. Specify the path actually located.

Action Backup set(%1$d) not found. Specify the path actually located.

24110: NBU_CLIENT_HOSTNAME_0 must start with the hostname first with case sensitive. (current settings: NBU_CLIENT_HOST NAME_0=%1$s, hostname=%2$s).

Cause NBU_CLIENT_HOSTNAME_0 must start with the hostname first with case sensitive. (current settings: NBU_CLIENT_HOSTNAME_0=%1$s, hostname=%2$s).

Action Retry the operation after checking NBU_CLIENT_HOSTNAME_0 and hostname in tip file.

24111: Backup datafiles need more redo logs at least until END_BACKUP to recover.

Cause Backup datafiles need more redo logs at least until END_BACKUP to recover.

Action Please restore more archive/online redo logs for appropriate recovery.

24112: Redo logfile generation time between the nodes is abnormal. Please check the system time.

Cause Highly possibly, the system time between the nodes may vary.

Action For now, please recover the DB with TSN based recovery (until change).

24113: All log files of this thread are never used at least once. (thread id=%1$d).

Cause All log files of this thread are never used at least once. (thread id=%1$d).

Action Please, check all the log files' seqno and try again.

24114: Backing up archive log files from NetBackup(%1$s) to NetBackup is forbidden.

Cause Backing up archive log files from NetBackup(%1$s) to NetBackup is forbidden.

Action Change the NBU parameters or execute '--with-archivelog'

24115: Backing up archive log files with '--delete-original' needs all standby nodes connected.

Cause Backing up archive log files with '--delete-original' needs all standby nodes connected.

Action Please check all standby nodes are connected to all DB instances.

24116: Can't find any backup archive logfile between %1$u and %2$u in CF (thread: %3$u, resetlogs: %4$d).

Cause Can't find any backup archive logfile between %1$u and %2$u in CF (thread: %3$u, resetlogs: %4$d).

Action Please check thread id, resetlogs, v$backup_archived_log, and actual backup path whether any exists.

24117: Tablespace '%1$s' must be offline for Online Media Recov ery.

Cause Tablespace '%1$s' must be offline for Online Media Recovery.

Action Set the tablespace '%1$s' to offline and try recovery again.

24118: All the specified tablespaces must be offline.

Cause All the specified tablespaces must be offline.

Action All the specified tablespaces must be offline.

24119: NetBackup operation is canceled/stopped. NetBackup slaves abort.

Cause NetBackup operation is canceled/stopped. NetBackup slaves abort.

Action NetBackup operation is canceled/stopped. NetBackup slaves abort.

24120: Unexpected block number(%1$u) of the block is read. (ex pected:%2$u )

Cause Unexpected block number(%1$u) of the block is read. (expected:%2$u )

Action Confirm the actual block is not corrupted on the disk.

24121: Failed to find backup file %1$s among backup paths %2$s.

Cause Failed to find backup file %1$s among backup paths %2$s.

Action Retry the operation with a valid backup directory and file.

24122: No such backup archivelog set %1$d.

Cause Cannot find the backup archivelog set.

Action Verify that the backup archivelog set exists and try again.

24123: Failed to find marker before change "UINT64_FMT(1$)" for thread %2$d.

Cause Failed to perform flashback database operation.

Action Check flashback marker status and list.

24124: Flashback logging is not on.

Cause Flashback logging is not on.

Action Activate flashback logging and retry.

24125: No such flashback thread %1$d.

Cause Cannot find the flashback thread.

Action Check the configuration and try again.

24126: Could only flashed back to the marker tsn %1$u, because CF-DD correction is required due to dropped datafiles. %2$s

Cause Could only flashed back to the marker tsn %1$u, because CF-DD correction is required due to dropped datafiles.

Action %2$s

24127: Database flashed back to TSN %1$u, but CF-DD correction is required because the datafiles that were dropped later exist now. %2$s

Cause Database flashed back to TSN %1$u, but CF-DD correction is required because the datafiles that were dropped later exist now. %2$s

Action %2$s

24128: Flashback database must be done beforehand.

Cause Flashback database must be done beforehand.

Action Please check if the database has been flashed back in advance.

24129: Shrunken datafile(TS #%1$u, DF #%2$u) cannot be flashed back and should be taken offline.

Cause Shrunken datafile(TS #%1$u, DF #%2$u) cannot be flashed back and should be taken offline.

Action Take shrunken datafiles offline and try again.

24130: Due to CF-DD correction, some TS/DF which turned into read-write or online need recovery. Please request %1$s.

Cause Due to CF-DD correction, some TS/DF which turned into read-write or online need recovery. Please request %1$s.

Action Please request %1$s.

24131: Can't find the target archive log in CF to %1$s (%2$s: %3$d).

Cause Can't find the target archive log in CF to %1$s (%2$s: %3$d).

Action Check whether the target archive log exists in CF or use '--arc-dest-force' option.

24132: Can't add a flashback marker due to some instance down.

Cause All nodes must be open to add a flashback marker.

Action Check all nodes are open and try again.

24133: Can't find the online flashback logfile in group #%1$u to be recovered by media recovery.

Cause All the online flashback logfiles must exist or the flashback logging must be off.

Action Restore the online flashback logfiles or turn off the flashback logging.

24134: Standby Redo thread #%1$d is too big (max %2$d).

Cause No space available for standby redo threads.

Action Contact the technical support team.

24135: If the database flashed back at least once, reboot is required after Media Recovery.

Cause If the database flashed back at least once, reboot is required after Media Recovery.

Action Reboot the database.

24136: Archived log thread %1$u, sequence %2$u already exists.

Cause Cannot add archived log into the Control File.

Action Contact R&D or re-generate the control file.

24137: Log history thread %1$u, sequence %2$u already exists.

Cause Cannot add log history into the Control File.

Action Contact R&D or re-generate the control file.

24138: Failed to execute the rmgr client command.

Cause Failed to execute the rmgr client command.

Action Check the client trace log.